Overview

The HuLog, HondaLog, and Xtreme HuLog are USB datalogging adapters that are used to datalog Honda ECUs.

Functionally the devices are identical, however the HuLog/Xtreme HuLog come in ABS plastic enclosures for protection.

Also, the Xtreme HuLog will retain its COM port assignment regardless of what USB port is used.

Tips and Tricks

To achieve maximum performance out of this device (and all Moates devices) we recommend setting the latency timer to 1 ms. This can be changed in Windows XP by using the following procedure:

1. Control Panel
2. System
3. Hardware
4. Device Manager
5. Ports (COM and LPT)
6. USB Serial Port (COMx)
7. Port Settings
8. Advanced
9. Latency Timer

Compatibility

The HondaLog/HuLog is compatible with:

• CROME Pro
• eCtune
• Neptune

How to Buy

DISCONTINUED

3 Basic rules for using HULOG/Hondalog

1. ECU Must be chipped. Properly. Software must be installed in the chip WHICH MATCHES THE SOFTWARE ON YOUR PC. Different versions of software on the PC can require different modifications to bin/chip. Yes, upgrading your PC software can break logging until you “upgrade” the software in your chip, too.
2. There is no plug n play for this stuff. Even if the drivers are installed automatically by Windows, software on your PC MUST BE CONFIGURED MANUALLY to match the hardware you are using and the modifications done to the bin/chip. There are several incompatible options and you must have the SAME on both the chip and your PC.
3. J12 (US/EU/big case) or J4 (JDM/small case) is required to be removed for all known aftermarket software